Installation Steps
1.Remove the screws near the pump. After removing, you need to remove the exhaust heat shield first, and then remove the pulley
2.To disassemble the pump, so try to drain the oil,Remove the oil pipe after draining,After removing other parts, remove the old pump
3.Screw the oil inlet hose, high-pressure oil outlet hose, upper fixing screw, and upper belt on the new pump
4.lift the protective cover of the belt pulley to align the belt to the belt groove of each wheel
5.adjust the screw of the tension wheel to make the belt expand Tight
6.pouring power oil into the oil pot, and finally powering the pipeline to exhaust