Feature(may vary by option.)

●YHTAUTO Power steering pump are precisely manufactured with superior quality material, it is responsible for ensuring that all power steering fluid reaches the different components within your steering system
●Replacement for BMW E84 E90 Series, Input your make, model, year and trim level into the amazon garage tool to verify if it fits your car
●Over time of use, the power steering pump is expected to fail because its not designed to last forever. When it is not working properly happens, you must get it replaced immediately
●Reference Number: 32 41 6 779 244, 21-110, 32416779244, 32414042624, AA121-110, 6P0969, 55-5801, 5801, meets OE performance, functions, directly replacement
●Please double check your vehicle fits our Compatibility Chart before buying. Do not hesitate to contact us if you have any doubts or queries

[without Active Steering]





Description

11
11

Item Specification

Item Type: Power Steering Pump

Pulley Included: without Pulley

Reservoir Included: without Reservoir

Hose Port Type: O-Ring

Power Steering Pump Outlet Attachment Type: Hose Barb

Power Steering Pump Outlet Thread Size: M16 x 1.5

Pulley Attachement Type: Press-On

Reference Part Number: 32 41 6 779 244, 21-110, 32416779244, 32414042624, AA121-110, 6P0969, 55-5801, 5801

Note: Some of Models Without Active Steering

22

Vehicle Information

For BMW:

  • X1 2013-2015 3.0L l6
  • 335xi 2007-2008 3.0L l6
  • 335is 2011-2013 3.0L l6 without Active Steering
  • 335i 2007-2013 3.0L l6 without Active Steering
  • 135is 2013-2013 3.0L l6 without Active Steering
  • 135i 2008-2013 3.0L l6 without Active Steering

  • Please confirm the vehicles model, year as well as the engine size when you purchase!
22

General Instruction on How to Replace the Power Steering Pump!

11

22

33

44

Clear Power Steering Pump Area

Disconnect the negative battery cable, and remove the intake hose, fan shroud, the cooling fan as well as any vehicle shielding.

Remove Power Steering Pump Pulley and the Pump

Use the special power steering pulley removal tool to remove the pully.

Drain the power steering fluid and remove the pump.

Install the New Pump and Reassembly

Place the new pump into position and install the mounting bracket bolts.

Reassemble the radiator fan, fan shroud, air intake and the lower shield.

Refill the Reservoir and Test

Flush and refill the reservoir with manufacturers recommended fluids.

Start the engine and turn the steering wheel about a quarter turn in either direction to make sure the pump is operating correctly.

Product information