Feature

●【COMPATIABLE VEHICLES】The Throttle Body FITS 2003-2009 Infiniti FX35, 2003-2007 Infiniti G35, 2002-2004 Infiniti I35, 2006 Infiniti M35, 2003-2006 Nissan 350Z, 2002-2005 Nissan Altima, 2002-2008 Nissan Maxima, 2003-2007 Nissan Murano, 2004-2009 Nissan Quest. PLEASE CHECK THE YEAR/MAKE/MODEL OF YOUR VEHICLE with the part finder tool on the top left corner to confirm before purchase.
●【REPLACE PART】Designed to meet or exceed: S20058,67-0001,337-50164,337-60868,161198J10C,161198J103,ETB0013. Package Including: 1 PCS of high performance throttle body.
●【IRONTEK’S AIM】Your driving safety is our top priority. Our products have the same specifications as the original, but higher quality. And all products are extensively tested for performance.
●【Premium Quality】 IRONTEK throttle body is made by OEM approved & ISO certified manufacturer. This part has undergone a rigorous test to ensure its non-corrosion and heat resistance.
●【Service】You can enjoy 1 year warranty, support replace, return and refund service. Please check the description and compatibility before purchasing, if you have any question please contact us.


Description

11

Part Fitment Information

  • 2003-2009 for Infiniti FX35 Base Sport Utility 4-Door 3.5L
  • 2003-2007 for Infiniti G35 Base Sedan 4-door 3.5L
  • 2003-2007 for Infiniti G35 Base Coupe 2-door 3.5L
  • 2004-2007 for Infiniti G35 X Sedan 4-door 3.5L
  • 2003-2006 for Nissan 350Z Base Coupe 2-door 3.5L
  • 2004-2006 for Nissan 350Z Enthusiast Convertible 2-door 3.5L
  • 2003-2006 for Nissan 350Z Enthusiast Coupe 2-door 3.5L
  • 2005-2006 for Nissan 350Z Grand Touring Convertible 2-door 3.5L
  • 2003-2005 for Nissan 350Z Performance Coupe 2-door 3.5L
  • 2004-2006 for Nissan 350Z Touring Convertible 2-door 3.5L
  • 2003-2006 for Nissan 350Z Touring Coupe 2-door 3.5L
  • 2003-2006 for Nissan 350Z Track Coupe 2-door 3.5L
  • 2002-2003 for Nissan Altima Base Sedan 4-door 3.5L
  • 2002-2003 2005 for Nissan Altima SL Sedan 4-door 3.5L
  • 2002-2008 for Nissan Maxima SE Sedan 4-door 3.5L
  • 2004-2006 for Nissan Maxima SE Elite Sedan 4-door 3.5L
  • 2004-2008 for Nissan Maxima SE Touring Sedan 4-door 3.5L
  • 2004-2008 for Nissan Maxima SL Sedan 4-door 3.5L
  • 2005-2007 for Nissan Murano S Sport Utility 4-Door 3.5L
  • 2003-2007 for Nissan Murano SE Sport Utility 4-Door 3.5L
  • 2003-2007 for Nissan Murano SL Sport Utility 4-Door 3.5L
  • 2005-2009 for Nissan Quest Base Mini Passenger Van 4-Door 3.5L
  • 2004-2009 for Nissan Quest S Mini Passenger Van 4-Door 3.5L
  • 2004-2009 for Nissan Quest SE Mini Passenger Van 4-Door 3.5L
  • 2004-2009 for Nissan Quest SL Mini Passenger Van 4-Door 3.5L

11

REPLACES PART#

  • S20058
  • 67-0001
  • 337-50164
  • 337-60868
  • 161198J10C
  • 161198J103
  • ETB0013

11

What are the Signs of a Bad Throttle Body?

1. Stalling

Since the throttle body is dirty or faulty, the engine may stall.

2. Unstable Idle

The PCM bases its idle calculations on a predetermined amount of airflow through the throttle body. When that predetermined value isn’t met, the engine may fail to idle properly.

3. Rough Running

A faulty throttle body can result the condition of misfiring and rough running.

4. Lightning Alarm

5. Reduced power warning message on the dash

Is it Safe to Drive with a Bad Throttle Body?

  • You might be wondering?is it safe to drive with a bad throttle body? The quick answer is no.
  • Once it start to show signs of going bad or being clogged, you should address the problem right away
  • Otherwise the vehicle may stall, creating a safety hazard.

How to replace a throttle body?

11

11

11

1. Open your hood and locate your engines throttle body.

2. Remove the air intake duct at the throttle body.

3. Inspect the throttle body ports for carbon build-up. Throttle bore wear is also common after long periods of time and throttle body assemblies will need to be replaced if worn.

4. Remove the throttle cable from the throttle body control lever.

5. Disconnect any air or vacuum hoses from the throttle body.

6. Remove the throttle position sensor from the throttle body.

7. Remove the throttle body mounting screws and remove the throttle body assembly. Discard the old gasket and install a new gasket between the throttle body and manifold during installation.

8. Match the new throttle body to the old throttle body making sure that sensors, hoses, and cables are all routed correctly to the new throttle body and that it mounts correctly to the intake manifold.

9. Install in the reverse procedure and follow manufacturer torque specifications during installation.

Product information