Feature

●CUSTOM 2-PIN LED FLASHER: 2 Terminals Heavy Duty 12V Electronic Led Flasher, MAX 20 AMPS, Round Plastic. Makes a Loud Clicking Sound During Work, Designed for What You Need.
●PLUG AND PLAY: Quick install ,Plug in and Attach Ground Wire. Work to replace Most Factory 2-Pin (L style socket) Flasher.
●A MUST HAVE ITEM: Stop Hyper Flashing, If You Want Upgrading Stock Bulb to LED or for Your Exist LED Tail Lamps of Turn Signal / Hazard Warn lights. Work on ALL LED or ANY Combination of LED/incandescent.
●NO LOAD FLASHER : Works Without Resistors, Need The Wire is Connected to a Known Good Ground(need the ground for the electronics to work), Therefore, Unless You Have a Good Ground on the Frame, You May Have to Connected the Flasher Wire Straight to the Negative Battery Post. Whats more, If Item not work. Please Checked the Polarity on Flasher Plug. High Probability the Polarity was Reversed, Try to Reversing them and it Would Work.
●HOW MANY YOU NEED?: If with Two Flashers Module, One for Turn Signals and the Other one for Hazards, You Should Get 2(Two). Because the Power to the Turn Signal Flasher and Emergency Flashers Comes from a different Circuit and Requires a Separate Flasher Module. Other than that, You Only Need 1(One).


Description

This is a custom heavy duty 2-Pin electronic LED flashers, Fix turn signal/hazard warn hyper flash.
They are a MUST if you upgrad LED lights want to STOP the fast flashing or Hyper-Flashing .
JUST PLUG and hooked the flasher wire to a known good ground or negative battery post .
Could be used for any 12V application that requires a two prong flasher.