Feature

●? 385311641 toilet valve Kit is a Well-Sealed toilet valve. for RV toilet valve 385311641 is made of strong and laasting ABS plastic and metal. All seals and connections on valves have been strengthened and thoroughly tested to ensure they do not leak. Lasting Toilet Water Valve Kit 385311641 With antifreeze technology, it can resist low temperature environment, good sealing, not easy to be broken, long-lasting.
●? Compatibility: 385311641 Toilet Water Valve Kit fit for most Sealand/ Traveler/ VacuFlush/ Dometic pedal-flush toilets,rv toilet water connector,new lasting plastic water valve kit,travel trailer toilet parts,rv water toilet valve,water valve for camper toilet. Replaces water valve on 300, 310 and 320 series Dometic pedal-flush toilets as well as RV camper vacu-flush.
●? Easy to Install: 385311641 for rv toilet valve can be installed without too many tools, just screw down and you make sure that settled properly and securely,Attach threaded spout to the outgoing water supply hose. Next, snap the opposite end into incoming water supply.also easy to remove without worry about breaking your toilet.Important: If the angle of the button is not installed properly, It will result the button is easy to be damaged because of the incorrect installed Physical angle.
●? Package Includes: 1x water valve, 1 x hose fasteners, 2x screws and 2x Stainless Mesh Filters.


Description

Specifications:
? Part Type: Toilet Water Valve kit
? Lasting Plastic Water Valve kit 385311641
? For water valve on 300 310 320 series pedal-flush Toilets. Also can works on RV Camper Vacu-flush
? Water Valve Kit Part Number: 385311641
? 385311641 toilet valve includes all necessary parts to get your valve working properly
? 385311641 rv toilet valve is well designed has very good sealing to safeguard against common plunger leaks
? Designed to protect from leaking and not easy to be broken

Fitment:
? Replace for 300 310 320 Series Pedal Flush for Sealand Marine Toilets
? Fit for a lot RV Camper Vacu-flush, for Traveler, for VacuFlush, for Boat RV Camper Toilet

How to install:
? Step 1: Turn Off the water supply
? Step 2: Disconnect The water Supply line from the water valve
? Step 3: Press the Flush Pedal to Drain Water From The toilet Bowl
? Step 4: Disconnect water Line to Vacuum Breaker
? Step 5: Press Top and Possibly Bottom Latches at the same time to Release, Then Pull water valve out of housing
? Step 6: Push New water valve into place Until latches Engage. If necesary use supplied fasteners to secure water valve
? Step 7: Connect water Line to Vacuum Breaker, with the Supplied Clamp
? Step 8: Connect water supply line to water valve
? Step 9: Turn on Water Supply to Toilet. Flush several times to check for leaks

Package Includes:
? 1x water valve
? 1x hose fasteners
? 2x screws
? 2x Stainless Mesh Filters