Feature(may vary by option.)
●Easy Installation - WOD KPT-1 Heat Transfer Tape is easy to peal, comes off clean, and with no residue, reduces clean-up time and minimizes rejects, ideal for protecting sensitive printed circuit board (PCB) components such as gold leads and fingers during the process of wave soldering, it may be hand-pealed, with a scissor, or utility knife.
●3D Printer Uses - This Cricut Heat Tape is a MUST when printing in shirts, hats, and more. Its polyimide film helps withstand high temperature and makes it conducive for installing on 3D printers with its heated build platforms. It also insulates your print from high voltage wonders experienced during Xerographic printing operations.
●High Temperature Resistance - Its adhesive will thermoset to increase adhesion values, when resisting to high insulation, high temperature, acid, alkalines, crocking, and tearing. It will resist up to 200 C. Film meets UL510 and it is formulated to meet spec MIL-P-46112B.
●Multi Purpose Applications - WOD KPT-1 Sublimation Tape is suitable for wave soldering shield of electronics, circuit board, motor, coil, capacitor, and transformer insulation. Also, for Masking, splicing wires, and protecting gold contacts from molten solder during hot air wave solder leveling process.
●WOD Tape stands as a top-selling brand on Amazon, dedicated to providing only the highest quality tape products. As a USA-based small business, our commitment to excellence extends to both our products and customer service.
[144 Rolls]
[1 Roll]
Description
Kapton High Temperature Resistant Polyimide Tape
WOD KPT-1 is layered with a high-performance silicone adhesive and polyimide film, which helps it withstand high temperatures, high insulation, acids, and alkalines, which makes it conducive for installing on 3D printers with the heated build platforms, circuit boards, electronics, transformers, and more.
Benefits
- Resists up to 200 C.
- Leaves no residue after removal.
- Easy to peal.
- Tape’s width, not too wide, and not too narrow.
- Thin, flexible, and tough, it nullifies the changes of getting punctured with sharp edges.
- Resistant to acids, solvents, oils, aging, water immersion, and staining.
- Wide enough to help maintain the alignment and cover your printers bed.
Applications
- Fiber optics cable protection.
- Automotive manifolds or sensors protection.
- Etching, and circuit boards protection.
- Cross-over insulation.
- Conductors bundling.
- Reinforcing insulation.
- Wave solder concealing of printed circuit boards.
- Electronics screen repair when ghost touching problem.
- Model railroad locomotives insulation.
Properties
- Tape Thickness: 2.6 mil
- Film Thickness: 1 mil
- Adhesion 23.8 oz/in
- Tensile Strength: >20.6 lbs/in
- Elongation: >30%
- Temperature Range: 200ºC (392 ºF)/30 min
- Dielectric Strength: >4000 V
- Film Color: Gold or Amber (Transparent)
- 3" plastic core