Feature

●Quick Setup for 45° lock miter joint for 1/2” and 3/4” (both 1/4” shank and 1/2” shank)
●Only compatible with KOWOOD for 45° lock miter router bit, 1/2” & 3/4” cutting height
●Easily, quickly and save your time for create a 45° lock miter joint
●Precisely Machined Setup aid and no test cuts requires
●User friendly, helps to adjusting bit. Make life easier!!After purchase, the e-book will be sent to your email, if you do not receive it, please contact customer service


Description

router bit set up jigsrouter bit set up jigs
router bit set up jigsrouter bit set up jigs

Tips: If you have a split fence, close the opening as much as safe operations

Tips: If the joint is good, but the surfaces are not even or the miter portion has a square edge, you must adjust the height of the bit upward or downward.

Tips: lf the wood is thicker than the setup jig, raise the bit and push the fence back slightly, until a good fit is obtained.

Tips: lf the wood is thinner than the setup jig, lower the bit and move the fence forward slightly, until a good fit is obtained.

Test Cut

set up jigsset up jigs

kowood set up jigskowood set up jigs

set up jigsset up jigs

1) A first test piece with rout the wood piece down against the router table.

2)A second test piece with rout the wood face against the router table fence.

3) Check both pieces is it in pro-

perly fitted as follow figure.

router bit set up jigsrouter bit set up jigs