Feature

●This tubing bead roller is used to form the roller at the end of an aluminum, steel or stainless steel intercooled pipes.
●By turning the handle on the side of the bead form roller tool, you can create the desired roller at the end of the aluminum or copper pipe.
●Just insert the end of the tube between the molds and start shaking the turning handle. This vise-mounted tool will form perfect beads on the end of aluminum or copper tubing.
●Durable Material: This tubing beader tool is made of reinforced anodized aluminum and stainless steel parts, ensuring better handling when using this tool. Replaceable friction points run on bronze bushings for long life. Hardened, precision machined internal gears ensure years of high quality bead use.


Description

Tubing Beader Tool Manual Bead Roller Intake and Intercooler Piping Crimping Tool Fit 5/8" or Larger ID Tubes Aluminum

1. Designed to be mounted in your vise whether mounted on a bench, wall, or floor.( Works best when secured in a vice.)
2. By turning the handle on the side of the tubing crimping tool, you can form the desired crimp on the end of the aluminum tubing or copper tubing. The detachable handle is specially designed for the user, allowing you to operate it more easily.
3. Form a perfect bead on tubes so that rubber or silicone hose can be more securely clamped to them.
4. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing. (Note: Always apply the bead before welding.)