Feature
●[Cut and Seal]: BISupply Heated Knife is a thermal blade that can be used to cut ribbon, fabric, plastic, or rope; Hot knife rope cuts materials with a width up to 2 inches (5.1cm); Hot rope cutter also seals rope as it cuts to prevent a mushroom effect and fraying
●[Install Anywhere]: 4 pre-drilled holes in base for permanent mounting in your garage, craft room, workshop; Operate in a well-ventilated area to avoid inhaling fumes; 4.75” x 4.2” x 3.1” inch (12.1cm x 10.7cm x 7.9cm) base, 2.1-inch (5.3cm) wide blade surface for finishing touches and melt fibers; 3-prong 42-inch (106.7cm) power cord; Includes brush with 5-inch (12.7cm) handle
●[Easy to Use]: Unscrew knife holder with the included T-bar hex key, place the 2 blade legs in the knife holder, tighten screws, then connect to an appropriate power connection; To use, turn the power switch to the “on” position, place your material to be cut on the blade, and turn the power switch to “off” after cutting
●[Built to Last]: AC 120V, 60Hz, 30W power; 932-degrees Fahrenheit (500°C) blade temperature; Conforms to UL STD.499 and is certified; Cuts and quickly heats to continuous high temperature (we recommend not leaving the hot knife cutting tool on for extended periods)
●[Package Contents]: Package includes (1) fabric hot knife, (1) hot blade, (1) T-handle hex key, and (1) cleaning brush
Description
|
|
|
|
|---|---|---|
CAUTIONWait for the blade to cool before handling. Depending on application, operate in a well-ventilated area to avoid inhaling fumes. |
EASY TO USEUnscrew the knife holder with the included T-bar hex key, place the blade in the knife holder, tighten screws while making sure that the blade and knife holder have full contact, then connect to the correct power supply to avoid short circuiting. |
PRE-DRILLED HOLESThe base includes 4 pre-drilled holes for permanent mounting in your garage, craft room, house, or storage shed. |
