Cooling Pads
feature:
Fits B+, Pi2 B, Pi 3, 3-Pack Heatsink
These heatsinks have a layer of thermal adhesive for easy mounting to your motherboard.
These heatsinks are short enough in profile to fit in a standard case.
The thermal conductivity of pure copper heat sink is as high as 401w/mk, which is very suitable for processor, CPU and GPU cooling, and has been tested for CPU/SoC, reducing the risk of hardware failure due to overheating.
These heatsinks include thermal tape to efficiently transfer heat to the heatsink, providing additional cooling to the IC. Also, its easy to remove with a blade, so you can remove the heatsink without damaging the chip.
These heatsinks can be used with other devices like the Beaglebone to cool processors, regulators, etc.
Installation Notes:
- Make sure the chip module is from dirt and grease.
- Peel off the protective lining on the bottom of the radiator.
- Attach the heat sink to the corresponding chip module and press firmly.
A package includes:
2 pcs - 14mm x 12mm x 5.5mm Copper Heat Sink