The channel and trench drain design isn’t just a great design; it’s engineered with a smooth installation in mind. Each 4’ segment can be joined together, or cut into 1’ increments. The grate is reversible ? one side is flat, the other side is convex. All pieces are ADA compliant. Each trench and channel section has anchor spots for rebar (to hold it down when filling around it), two sections to install 2x4s (to help with leveling and anchoring), and each 1’ section has a drainage port. The drainage ports accept 3” and 4” SCH40 pipe or 4” SDR35 pipe. All accessories are manufactured in the same color as the trench for seamless installation.
|
|
|
|
---|---|---|---|
END CAP FOR TRENCH DRAINYou have no need to worry about your trench runs looking seamless since there is an end cap available for each color. Pick your end, slide it in, and you’re good to go. |
END OUTLET FOR TRENCH DRAINMade so you can drain out of the ends of your trench run, and not underneath, you still have no need to worry about your trench runs looking seamless. Pick your end, slide it in, install your pipe, and you’re good to go. |
90° CORNER DRAIN & GRATEThe corner easily attaches to either end of the trench drain, and comes with the same reversible, ADA compliant grate as the trench drain. It is manufactured in the same colors as the trench, and accepts either the end cap or end outlet (with or without the corrugated adapter). Includes: |
TEE TRENCH DRAIN & GRATEThe tee easily attaches to either end of the trench drain, and comes with the same reversible, ADA compliant grate as the trench drain. It is manufactured in the same colors as the trench, and accepts either the end cap or end outlet (with or without the corrugated adapter). |
|
|
|
|
---|---|---|---|
BlackIncludes:
|
GrayIncludes:
|
GreenIncludes:
|
TanIncludes:
|