Feature

●☆Watch Pressure Tester: The air pressure of the watch waterproof tester can be adjusted up to 6 ATM, which means you can test watches with waterproof levels up to 6ATM. After the gas cylinder is decompressed, there will be a pressure difference between the inside and outside of the test watch, which can more effectively test the waterproof performance of the watch.
●☆Transparent cylinder: Using a transparent cylinder makes it easier for you to observe which part of the watch is not waterproof. After the sealed box is decompressed, there will be a pressure difference between the inside and outside of the product. Air bubbles may be visible to the naked eye in spilled product.
●☆Simple and efficient: The watch waterproof tester can test up to two watches at a time. This watch waterproof test tool is simple in design. With the watch waterproof tester, you can test the waterproof performance of the watch more effectively, simply and efficiently.
●☆Wide range of applications: This watch pressure tester is specially designed to test the waterproof performance of watch cases. Effectively test the water resistance of watches in your business. This tool is perfect for watch enthusiasts or even watch repair shops
●☆Note: After the cylinder is decompressed, a pressure difference between the inside and outside will appear on the test meter. If the waterproof performance of the watch is weak, small bubbles can be visually observed at the leakage point through the transparent cylinder. (Two watches can be tested simultaneously.)


Description

Specification:
Condition: 100% new
material: metal
Color: as shown in the picture
Air pressure test range: 0.3-6.0bar
Maximum test diameter: 65mm/2.6 inches
Maximum test height: 72mm/2.8 inches
External air pressure connection: 6N
Maximum cylinder pressure: 10 bar
Cylinder outer diameter: 80mm/3.2 inches
Cylinder bore: 65mm/2.6 inches
Cylinder height: 138 mm/5.4 inches
Size: 243*13*282mm
Weight: 3780g

Instructions:
1. Pull out the watch lever as much as possible;
2. Loosen the two screws and take out the cover;
3. Add water to the designated red line of the bucket;
4. Hang the watch on the hanging pole;
5. Install the cover and tighten the screws;
6. Shake the pressure lever to allow the air pressure to reach 3 air pressures (the official standard of the Swiss watch industry), and wait for three minutes to allow air to enter the entire watch;
7. Press down the watch lever, immerse the watch in water, and press the exhaust button to let the air escape;
8. When the pressure drops, observe whether bubbles appear on the watch. If bubbles appear, the watch is not tightly sealed. Quickly open the hanging rod and take out the watch. There are no bubbles and the watch is well sealed.