Feature

●LIQUID DEPTH SENSOR : water level gauge monitors tank liquid depth level to show on a 10-element LCD display bar graph; Supports tank liquid level high/low alarm and tank liquid empty alert.
●APPLICATION : The liquid level sensor could be installed at the top of water tank to monitor liquid level; You can store min/max records and set alarms for specific water levels (high/low) or when empty.
●EASY TO USE : The receiver can be installed on desk or hanging on wall; Keep an eye on your outdoor water tank from indoor or pavilions; Transmission range up to 100m away(in open space).
●VERSATILE PURPOSE : liquid level meter can displays both indoor and tank temperature (℉ or ℃) at the same time.
●RISK : We know the importance of product quality to you, so if you have any dissatisfaction with the wisdom of the product you buy, please contact us for exchange or refund.


Description

Specification:Indoor Temperature Range: 0~60 Degree cOutdoor Temperature Range: -40~60 Degree cTemperature Accuracy: ±1oCWater Level Measure Rang: 0~15m Resolution: 0.01m Accurate: +/-0.03MTransmission Frequency: 433MHZTransmission Range: 100 meters(300 feet)in open areaTransmission Interval: 30s when level changes or 3 minutes when level does not changeReceiver Battery: 2X AA 1.5V LR3 Alkaline batteries (Not included)Transmitter Battery: 6X AAA 1.5V LR6 Alkaline or lithium batteries (Not included)Battery Life: Minimum 12 months for receiver Minimum 12 months for transmitterReceiver Size: 108*94*27mmTransmitter Size: 97*68*152mmLCD Size: 66*45mm(3.3 inch)Suitable Liquid Type: All non-corrosive liquidOpen Distance: Approx.100M/328.1ftEffective Distance : Approx.30M/98.4ftPackage Includes:1 x Water Level Sensor Transmitter1 x Indoor Receiver2 x Screws(Batteries are NOT included)Note:1. Install the battery in the battery compartment of the transmitter, do not insert the battery compartment, and insert the battery synchronously after the receiver is set up2. The liquid level indicator has no data, press the tank key, and the data will be displayed.3. When reset, remove the battery Wait for a while and then turn on the power to eliminate the remaining power in the machine.4. Whether the red light of the transmitter flashes, the flashing is normal, and vice versa.