Feature

●Overall dimension is 2-1/4" (height) x 1-7/32" (base diameter), screw stem is 1-1/2", 5/16"-18 thread with adjustable height range from 0.75" to 1.5", T-nut is 9/16" x 3/4", please check detailed dimension on the photo.
●Package includes 8 x Furniture Legs, 8 x Nickel T-nuts; easy installation, just drilling a 7/16" hole, tapping into T-nuts and screwing in leveler to the height you desired, it also allows you to adjust the angle from 90° to 70° from the floor.
●Fitting for many floors such as hardwood / tile / carpeting floors, designed to level on uneven floor or adjust to needed height or balance your furniture legs, protecting from scratch or moisture or harsh noises.
●Leveler with lock nut is made of plated zinc screw stem plus strong nylon plastic bottom, nut is nickel-plated metal cover, ensuring firmness, durability and rust resistance, 4 leveling feet together can support about 320lbs.
●Allow easy leveling of furniture at many application: home, kitchen, garage, workshop and office, it could be placed solidly on tables, chairs, shelving units and cabinets, getting rid of the problem of wobbly or unbalanced table legs.


Description

Features:

▶Sturdy nylon plastic base + plated zinc screw + nickel-plated metal cap made up this durable furniture legs.

▶Premium leveling feets for adjusting furniture height, can adjust each leg to desired height individually.

▶Can be adjusted both vertical and horizontal, adjusting the height from 0.75” to 1.5” and angle from 90°to 70° from the floor.

▶Protect your hardwood floor / tile floor / carpet, great for a table and bench, no more scratched floors.

▶Typically used on conference room, home tables, desks, restaurant furniture, cabinets, display rack and so on.

▶Easy installation and convenient to adjust with screwdriver, great load capacity for your furnitures.

▶Reduces friction & noise while moving furniture, hard nylon glide is kind to various floors.

Installation Instruction:

1. Marking the center of the leg, then drilling a 7/16 inch hole whose depth is 1-1/2 inch. (Drilling a pilot hole would help to prevent table leg from splitting)

2. Placing zinc threaded cap into the hole, then screwing it tightly.

3. Putting this furniture leveler inside the zinc nut.

4. Using included wrench or your hands to screw the felt pad and adjust to your desired height.

Specification:

Material: Metal + Nylon Plastic Base

Color: As Photos Shown

Overall Dimension: 57.5mm / 2-1/4" (Height) X 31mm / 1-7/32" (Base Diameter)
Thread: 5/16"-18S
Height of Bottom: 12.5mm / 1/2"
Height of Screw Stem: 38mm / 1-1/2"
Height of Lock Nut: 7mm / 0.28"
Dimension of Nut: 9.5mm / 3/8" x 14.5mm / 9/16" x 19.6mm / 3/4"
Dimension of Open-end Wrench: 81mm / 3.2" x 14mm / 0.55"
Swivel Angle: From 70° to 90°

Package Includes:

8 x Furniture Legs
8 x Nickel T-nuts