Feature(may vary by option.)

●1.This product is suitable for most 12V motorcycles, such as Kawasaki, Honda, Suzuki, Yamaha, KTM.
●2.This LED Electronic Flasher Relay Fix the LED Bulbs Related Turn Signal Light Hyper Flashing, not Function Properly issues.
●3.Operating Voltage: 12V (11V-15V). Max Power: 42W. Switch Power: 0.02A to 12A. Working Temperature: -40°C to +80°C .Flashing Frequency: 50-200 times/min.
●4.You can adjust this product directly by hand, and you can easily adjust it without any auxiliary tools to help you upgrade your signal light easily.
●5.2-pin flashlight relay 12V motorcycle speed is adjustable for LED steering. Please make sure the model is appropriate when purchasing.

[Black 2pcs]





Description

Turn signal flash relayTurn signal flash relay

Product Description

The adjustable 12V relay of this product is a 2-pin general-purpose relay, which is plug and play, and is compatible with most 12V motorcycles. This product is of the same quality as the original factory, and can be used safely. It can accompany you for a long time, and it can bring you a new experience.

2 Pin Electronic Flasher Relays for replacing a bad relay or correcting led turn signal problems (fast Flashing, no flashing)

Operating Voltage: 12V (11V-15V).

Max Power: 42W.

Switch Power: 0.02A to 12A.

Working Temperature: -40°C to +80°C .

Flashing Frequency: 50-200 times/min

LED electronic flash lamp relayLED electronic flash lamp relay
LED electronic flash lamp relayLED electronic flash lamp relay

Introduction

The flicker frequency of the turn signal lamp can be adjusted. The advanced SMD chip technology is adopted, with automatic short circuit protection, automatic overload protection, and automatic reverse connection protection, which can make the bulb work more stably

use:

It is the third gear frequency, and it turns faster in the counterclockwise direction and slower in the clockwise direction

Installation tips

LED electronic flash lamp relayLED electronic flash lamp relay

Turn signal flash relayTurn signal flash relay

Flasher relayFlasher relay

1. The feet must be properly aligned during installation. If the feet are misplaced, the function of the flasher cannot be realized

2. If the flash lamp is replaced and the four lights are on at the same time, you need to unplug the steering indicator on the instrument panel

3. Pin B is input and pin L is output

Product information