Pool Fence DIY by Life Saver Fencing Section Kit, 4 x 12-Feet, Black
Easily customizable to fit around your pool, the Pool Fence DIY mesh pool safety system from Life Saver helps protect against accidental falls into your pool and can be installed by yourself (no contractor required). This 12-foot long section of fence has a 4-foot height (recommended by the Consumer Product Safety Commission) to help make your backyard pool area a safer place for children. In addition to concrete and subtantial surfaces, Pool Fence DIY by Life Saver can be installed into pavers, on sand/crushed stone, on a wood deck, and into dirt, rock gardens, and other loose surfaces. The fence is constructed of industrial-strength Textilene PVC-coated nylon mesh, which has a strength rating of 387 pounds per square inch. The UV-resistant mesh provides years of use in all weather conditions. The stainless steel pins are easily inserted into the supp;ied sleeves (after installation) and exceeds most local safety requirements. The fence can be removed when no children are present. To determine how much fencing your pool area needs, measure around the edge of your pool and leave 24 to 36 inches of space for walking and cleaning. After determining your total footage, divide by 12 to calculate the correct number of sections needed. When installed, poles are spaced out every 36 inches. This package includes a 4-foot high x 12-foot long section of mesh pool fence with five integrated poles (each with a 1/2-inch stainless steel peg), deck sleeves/caps, safety latch, and template (gate sold separately). Installation requires a rotary hammer drill with a standard 5/8-inch x 14-inch (minimum) masonry bit (not included). The optional Pool Fence DIY Drill Guide (sold separately) takes the guesswork out of the drilling process for proper in-ground installation. Pool Fence DIY offers 7-day-a-week installation support by phone, and is backed by a limited lifetime warranty. A family owned and operated company based in Delray Beach, FL, Life Saver has been has been keeping little feet on solid ground for over 25 years. In addition to Pool Fence DIY, Life Saver offers a contractor-installed Pool Fence option in most populated areas of the country.
Water Warden Drill Guide
Keep your pool area secure with this innovative and attractive safety fence. When properly installed it will eliminate the type of tragedies that occur all too frequently every summer. Our fence is easily self-installed and the super-strong woven mesh will not allow children or pets to enter the pool area unsupervised. Unique climb-resistant mesh gives children and adults no toeholds or finger holds. With our safety fence, your pool is protected from accidental drowning. Our fence is designed to be self-installed and requires only 5/8-inch holes to be drilled in the deck. All posts and screws are made of stainless steel hardware that will not rust or corrode. The safety fence can easily be removed and reinstalled in minutes by a single person. The lightweight fence rolls up when not in use for easy storage. The fence comes with plastic covers for the postholes when the fence is not in use. It comes in pre-assembled 4-feet H by 12-feet L and 5-feet H by 12-feet L lengths and it can be easily shortened to fit any pool area. Our optional gates feature true close hinges that are spring loaded to self close and Magna-Latch lock to prevent entry by children at no extra cost. Gates are available in 4-feet and 5-feet heights and they are 30-inch wide. Safety fencing comes complete with hardware, measuring template, instructions, and a free installation video. A rotary hammer drill is required for installation. Backed by a 5-Year Warranty. Available in black only.