Feature

●[EXCELLENT THERMAL CONDUCTIVITY] - This thermal conductive pad provides good thermal conductivity to effectively transfer heat from heat-generating components to the heat sink.
●[WIDE APPLICATION] - Suitable for graphics card North-South bridge, home appliances, high-speed hard drive, micro heat pipe radiator, high-power power supply, and LED industry.
●[EASY TO USE] - The sticky silicone sheet is easy to apply and can be placed between the heater and the heat dissipating component to achieve efficient heat transfer and insulation.
●[DURABLE AND FLEXIBLE] - Made of high-quality silicone material, this thermal pad offers insulation, viscosity, elasticity, and low heat resistance properties.
●[SAFE AND RELIABLE] - With stable heat conduction and insulation properties, this silicone thermal sheet meets the thermal insulation requirements of most electronic products.


Description

Item Type:Thermal Conductive Pad
Size:200 x 400 x 2mm / 7.87 x 15.75 x 0.08in
Color:Blue
Thickness Tolerance:0.2+-0.01
Continuous Using Temperature:-50~200℃
Conductivity Coefficient:1.5W/m-k
mass resistivity:10^12
Breakdown voltage:4.5KV
Hardness:30±5 Shore A
proportion:2.05
tensile strength:15 kg/cm㎡
Extension:48%
Flame Retardant Grade:90V-0-1

Users Manual:
1.Clean the surface, it will be glued or cleaned by the surface of the object to remove dust and oil.
2.Tear protective film
The left hand picks up the protective film on the side of the product with the right hand, and can not tear the protective film on both sides at the same time, reducing the number and area of direct contact with the silicone sheet to avoid damage to the viscosity and thermal conductivity of the product.
3.Fixed heat sink
Remove the protective film from the other side, apply a certain pressure to the heat sink after installation, and then fix it with screws.

Package List：
1 x Thermal Conductivity Pad