Feature

●Good thermal conductivity, insulation, viscosity, elasticity, low heat resistance, filling.
●Applicable to graphics card North-South bridge, home appliances, high-speed hard drive, micro heat pipe , high-power power supply, LED industry.
●Thermal conductive silicon film has excellent thermal conductivity to meet most electronic products heat conduction insulation requirements, is specially designed for the use of interval heat transfer design, can fill intervals, effective heat transfer of heating parts to the
●At the same time this product has the viscosity, the application is simple and convenient.The silicon film uses the soft gel heat conduction material stable heat conduction, the insulating property as well as the soft and the elastic characteristic, puts on the heater and the heat dissipation part, achieves the heat transfer and the insulation effect.
●Convenient to use,very user friendly,high thermal conductivity.


Description

Specification:
Item Type:Thermal Conductive Pad
Size:100 x 100 x 1.5mm / 3.94 x 3.94 x 0.06in
Color:Blue
Thickness Tolerance:0.2+-0.01
Continuous Using Temperature:-50~200℃
Conductivity Coefficient:1.5W/m-k
mass resistivity:10^12
Breakdown voltage:4.5KV
Hardness:30±5 Shore A
proportion:2.05
tensile strength:15 kg/cm㎡
Extension:48%
Flame Retardant Grade:90V-0-1
Users Manual:
1.Clean the , it will be glued or cleaned by theof the object to remove dust and oil.
2.Tear protective film
The left hand picks up the protective film on the side of the product with the right hand, and can not tear the protective film on both sides at the same time, reducing the number and area of direct contact with the silicone sheet to avoid damage to the viscosity and thermal conductivity of the product.
3.Fixed heat sink
Remove the protective film from the other side, apply a certain pressure to the heat sink after installation, and then fix it with screws.

packing list:
5 x Thermal Conductivity Pad