Feature

●30 BLADES: Compatible with Graphtec CB09U CB09, made from tungsten cemented carbide. High hardness, come with springs and blade holder base. 10 pcs for each degree.
●APPLICATION: Fine polishing process, suitable for mahogany, wood, PVC color board, MDF and other precision relief.
●30 DEGREE: 30° blades are predominantly used for cutting very thin window tint and mylar materials.
●45 DEGREE: 45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calendered vinyls as well as other thin materials such as ThermoFlex Plus.
●60 DEGREE: 60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.


Description

11

AFUNTA 30 pcs 30/45 /60 Degree Carving Knife Vinyl Cutter Plotter Cutting Blades for CB09 CB09U Graphtec ? Blue, Yellow, Red

11

11

11

22

11

Specification:

Materials: Tungsten Cemented Carbide

Length of blade: 12mm

Degree of Blade: 30 / 45 / 60 degree

Package Includes:

10 x 30 Degree Cutter Blade (Yellow)

10 x 45 Degree Cutter Blade (Red)

10 x 60 Degree Cutter Blade (Blue)

22

Tips:

1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.

2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem.