|
|
|
|
---|---|---|---|
1.get rid of the remaining thermal paste on the chip. |
2.Do this until you get rid of it on the heat sink’s end as well |
3.Carefully apply a dot of the replacement thermal paste on the CPU when the chip is cleaned and the alcohol has dried. |
4.Make sure you carefully place the heat sink back on the CPU after the paste is applied. |
Color: | Grey |
Thermal Conductivity: | >6.5 W/m-K |
Thermal Impedance : | <0.0016 ℃-in2/W |
Specific Gravity | >3.25 g/cm3 |
Viscosity | 1000 |
Thixotropic Index | 330±10 mm |
Moment Beared Temperature | -50~340℃ ℃ |
Operation Temperture | -30~280℃ |
Silicone Compounds | 30% |
Carbon Compounds | 20% |
Metal Oxide Compounds | 50% |
|
|
|
|
---|---|---|---|
Make sure you unscrew all of the screws from the graphics card. with the addition of a screwdriver. |
You also need to get rid of the old thermal paste from your GPU,You’ll need all the same equipment |
Apply the thermal paste to the chip just as we did with the CPU. |
Tighten the screws back in a cross pattern to make sure everything is fitted and tightened right. |