Professional Installation:
- 1. Use a drill bit to drill sensor mounting holes on the front and rear bumpers of the vehicle.
- 2. Remove the boot inner cover, and thread the sensor harness from the rear bumper mounting hole to the boot. At the same time, thread the front sensor from the front bumper mounting hole through the engine compartment to the main cab, and connect it to the boot through the door edge gap.
- 3. Connect the red harness to the reverse line and the white harness to the brake line.
- 4. Finally, connect the parking reverse sensor display and sensor harness with the host machine. The reverse sensor display needs to be connected from the trunk to the main cab.
- 5. After arranging the harness and restoring the removed components, the installation can be completed.
- For non-professional customers, it is recommended to find an automobile technician or go to an auto repair shop for the replacement!
- This is non-OEM product, accessory ONLY!