[800ml]
Using heating cup base, thread base so that your product more competitive advantage.
Product Specification:
Product Name: Vapor Headlight Restoration Kit
Material: Iron Plating
Cup Length: Approx. 11.5 cm/4.52 inch
Cup Diameter: Approx. 8.1 cm/3.19 inch
Funnel Diameter: Approx. 6.5cm/2.56inch
Function: Headlight Repair Tool Atomization Cup
Rated voltage: 12V
Input power: 60W
Capacity: 500ML
Repair fluid: 100ML/200ML/800ML
Package Includes:
1 pc * Atomization Cup
1 pc * Atomization Cove
1 pc * Repair Fluid
1 pc * Power Supply Cable
1 pc * Adhesive tapes
How to use:
1. Wipe the car lights clean.
2. Use masking paper to cover around the car lights to prevent damage to the car paint.
3. Polish the car lights with sandpaper.
4. Pour the repair solution into the atomizer cup.
5. Turn on the atomizer cup and heat it for 1-3 minutes. When steam appears, you can start operation.
Note:
1.The original coating layer on the surface of the lamp should be thoroughly polished, and the surface of the lamp that is not completely polished will not be coated.
2.The tilt of the tank should not exceed 75 degrees during operation, and prevent droplets from dripping on the lamp surface.
3.When the ambient temperature is below 20 ° C, heat the lamp surface to 50 ° C with a baking lamp or a hair dryer, or turn on the headlight to preheat
Coating in 10 minutes.
4.Please wear protective glasses. Mask, in a well-ventilated place. If the coating solution is accidentally splashed into the eyes, rinse immediately with plenty of water and seek medical attention. If you inhale a lot of steam, move to fresh air quickly and keep your respiratory tract clear.
5.After the lights are repaired, do not wash the car with chemicals for 14 days.
After-sales service:
If you encounter any problems or disputes in the purchase process, please communicate with us