[H2]
[ARB3727H1-NEW]
[H3]
[H4]
[H5]
[H6]
Instructions for ARB-3727H Auto Clicker (plug-in version)
Features:
The automatic tapper for the phone screen has 3 setting buttons, the fastest is 33 times a second, which is 5 times faster than the human hand and the slowest is 1 click in 99 seconds. The last used gear parameter will be automatically memorized and saved after power off, one-press start, and stop at any time. Supports imitation finger (irregular) clicks.Suitable for games, live broadcast likes, task rewards,will save you a lot of time.
Speed ??gear introduction:
1.Press【+】【-】at the same time for random gear: click randomly within the speed range of 1 second/time - 1 second/33 times.The screen display [--]
2.Quick click: The fastest is 33 times a second.The screen display [-3] means 33 clicks per second.
3.Slow click: The slowest click is 1 time in 99 seconds.The screen display [99] means 1 click in 99 seconds.
Use steps:
Step 1: Remove the transparent protective cap on the click head to reveal the click contact point, a circular nano sticker is attached to the click contact point, and the outer layer of the nano sticker has a transparent film. The nano sticker is sticky, and its function is to fix the click head on the mobile phone screen. If we use the click head directly on the mobile phone screen, we need to tear off the transparent film. If it is fixed with a suction cup, the film does not need to be torn off.
Step 2: Insert the line of the click head into the click head socket on the top of the host, and the speed of each socket is the same; be sure to insert the click head plug to the end.
Step 3: Connect the host to the Type-C power cable and the click head. After power on, the host will automatically start clicking.In the state of running click, the click head will flash blue light.