[F-P]
[ARB3727F1-NEW]
[F2]
[F3]
[F4]
[F5]
Instructions for ARB-3727-F Auto Clicker (Plug-in version)
Speed ??gear introduction:
1.P1-P3 is a random gear: click randomly within the speed range of 1 second/time - 1 second/30 times.
2.Quick click: The fastest is 30 times a second.
3.Slow click: The slowest click is 1 time in 900 seconds.
Use steps:
Step 1: Remove the transparent protective cap on the click head to reveal the click contact point, a circular nano sticker is attached to the click contact point, and the outer layer of the nano sticker has a transparent film. The nano sticker is sticky, and its function is to fix the click head on the mobile phone screen. If we use the click head directly on the mobile phone screen, we need to tear off the transparent film. If it is fixed with a clip, the film does not need to be torn off.
Step 2: Insert the line of the click head into the click head socket on the top of the host, and the speed of each socket is the same; be sure to insert the click head plug to the end.
Step 3: Connect the host to the Type-C power cable and the click head. After power on, the host will automatically start clicking. The default setting click speed is 30 times per second, and the host screen will display (-30) after it is turned on. In the state of running click, the click head will flash green light.