Feature(may vary by option.)

●【?????????????????? ?????????????????????? ???????????????? ?????? ????】In TX mode, plug the Bluetooth transmitter into non-Bluetooth devices such as airplane/TV/MP3 player, then you can easily wirelessly transmit audio to Bluetooth speakers/headphones; in RX mode, plug this bluetooth receiver into wired speakers/headphones and you can wirelessly stream audio from your phone/tablet/computer. Its a pretty useful gadget for a home.
●【???????? ????????】 1Mii Bluetooth Adapter for TV can be paired to two Bluetooth headphones or speakers simultaneously. Both enjoy ultra-fast, high-quality stereo sound. It supports aptX low latency and aptX HD when pairing two headphones as well.
●【???????? ????/???????? ????】1Mii Bluetooth Transmitter for TV, Impressive sound quality, featuring aptX Low Latency and aptX HD technology, 1Mii Bluetooth Adapter for TV is ideal for watching TV. NOTE: Low latency supported Bluetooth headphones/speakers are required or you may experience a 70-220ms delay.
●【???????? ?????? ????????】 1Mii Bluetooth Adapter for TV Built-in battery delivers 10 hours of use in transmitter mode and up to 12 hours in receiver mode. Supports playing while charging. Ensures enjoying your favorite wireless content all the time. Bluetooth 5.3 technology enables faster and more stable connection, up to 32 to 50ft Bluetooth signal without obstacles. Just plug and play, easy setup.
●【???????? ???????? ?????????? ?????????? ????????????】1Mii Bluetooth Adapter for TV has a cute and compact design that takes up less space, so you can take it anywhere. Connect it to your vehicle, flight system, fitness equipment, gaming device, or any headphone jack and youll have a hassle-free wireless audio experience without untangling any tangled wires. Make your journey colorful.

[White]




[Black]





Description

ML301-BTML301-BT
ML301-RXML301-RX
ML301 Bluetooth Audio Transmitter

Supports aptX Adaptive/ aptX HD / aptX Low Latency

Equipped with APTX Low Latency, the audio delay has been minimized to about 40 ms, the Bluetooth transmitter delivers fully synchronized audio and video.

1Mii ML301 Bluetooth Transmitter Receiver 2-IN-1

RXRX

Bluetooth Receiver Mode

Step 1-Switch to RX and connect via audio cable to your old speakers/amp/car audio.

Step 2-Long press until the LED flashes red and blue, which means the ML301 is in pairing mode.

Step 3-Start Bluetooth on your phone/computer, select ML301 to connect and enjoy music wirelessly.

TXTX

Bluetooth Transmitter Mode

Step 1-Connect audio devices with an audio cable and set it to TX mode.

Step 2-Long press until the LED flashes red and blue, which means the ML301 is in pairing mode.

Step 3-Put your Airpods/Bluetooth earphones/earphones into pairing mode and wait for connection.

Frequent Q&A

Q1 Why do I still experience voice delays when using this ML301 Bluetooth low latency audio transmitter with my Bluetooth headphones?
A1 To achieve low latency, your Bluetooth headphones/speakers should also support the aptX Low Latency codec. Or the receiving device may use a different codec (e.g. SBC, aptX), resulting in an audio delay of 70-200 ms, which may be noticeable for some users.
Q2 What should I do if I cant pair the ML301 jack bluetooth adapter with my Bluetooth headphones or speakers?
A2 1. Switch off Bluetooth on all devices in your home. Make sure that your headphones or speakers are not connected to another device when pairing with the ML301 Bluetooth audio transmitter for the first time. Keep the devices close to each other (within 1 metre) during pairing. 2. If still no connection is established, reset ML301: Press and hold the Bluetooth button for about 7 seconds until the light flashes purple three times.
Q3 How do I pair two headphones in TX mode?
A3 After successful pairing with the first headphones, press the pairing button for 2 seconds. The LED indicator flashes red and blue again. And put your other headset into pairing mode and let it pair, after the two headsets are successfully paired, the LED light will turn purple, indicating success.
Q4 Please ensure the aux cable is tightly plugged into the “AUDIO OUT” or the headphone jack in your TV and that both devices are successfully paired. Then change the TV’s sound settings from “TV speaker” to “Audio out”.
A4 Please ensure the aux cable is tightly plugged into the “AUDIO OUT” or the headphone jack in your TV and that both devices are successfully paired. Then change the TV’s sound settings from “TV speak
Q5 Can this product make a phone call?
A5 The adapter doesn’t have a built-in mic, so it cannot support any calls or communication, and can only play or listen to the sound.
Notification 1 The aptX-Low Latency/Adaptive/HD codec can only be used if your receiver device supports these functions.
Notification 2 It is compatible with AirPods, but it is UNCOMPATIBLE with AirPods Pro 2nd Gen.

Looking for specific info?