Feature

●?【Good Cooling Effect】: The parking air conditioner is a kind of in-car air conditioner. It uses the on-board battery DC power supply (24V) to make the air conditioner run continuously to adjust and control the temperature, humidity, flow rate, and other parameters of the ambient air in the car, to fully meet the comfortable cooling needs of the truck driver.
●?【Saving Energy】: The parking air conditioner works with a truck battery without an engine. Meanwhile, it adopts digital frequency conversion and allows you to use the energy-saving mode when you sleep at night, saving you lots of energy.
●?【Long Endurance】: The universal split air conditioner can work continuously for about 6 to 8 hours on a full charge, which can meet your daily needs.
●?【Fits (As a Reference)】: The universal split air conditioner is fit for car (Cab Within 6㎡/64ft²).
●?【Package Included】: 1* Air Conditioner Kit, 1* Remote Control, Other Accessories for Assembly


Description

Specifications

Applicable Models: Car (Cab Within 6㎡/64ft²)

Color: Black, White

Voltage: 24V

Rated Power: 950W

Condition: New

Material: Copper, Aluminium, ABS

Installation Position: Inside the Cab; Outside the Cab

Refrigerating Capacity: 1000W-3000W (3400-10238BTU)

Refrigerant: R134A (400-450g/0.88-0.99lbs) (Not Included in the Package)

Oil: 90ml-120ml/0.02-0.03gal POE68

Speed Range: 1000-3000rpm

Way of Use: Direct Replacement

Number of Pieces: 2

Outdoor Unit Size: 49*21*66cm/19.3*8.3*26inch

Indoor Unit Size：49*33cm/19.3*13inch

Installation

1.Remove the outer casing.

2.Select the installation position and mark the punch position. (Select 5 installation points)

3.Punch holes at the mark points. (Tool: an 8mm/0.3inch drill)

4.Use a pull riveter to fix the pull rivet nut at the marked hole.

5.Fixed the damping pad and sleeve at the marked points on the external machine.

6.Fixed the external machine.

7.Install the internal machine: install an expansion valve.

8.Fixed internal machine mounting plate.

9.Fixed the internal machine.

10.3/8inch pipe (high-pressure pipe) connected to the condenser.

11.Connect internal and external machine wires and power cord.

12.Connect internal and external pipes, and fixed the evaporation box.

13.Connect internal and external wires.

14.Install the drainage pipe.

15.Vacuum for 15-20 minutes.

16.Refill refrigerant (Pure R134a) 400-450g/0.88-0.99lbs.

17.The power cord is connected to the battery.

18.Install the outer casing.

19.Winding tape to fix the internal and external machine connecting pipe and the internal and external machine connecting wire.

20.The installation is complete.