Feature

●Economic and Environment Friendly - The 12v mini split is able to be provided energy from either engine or additional battery which helps save up to approx. $6,552/Year. It keeps running at low noise even when the car engine is off.
●Scroll Compressor Rapid Cooling - Motor rpm up to 2500-speed which cool down the interior temperature in just few minutes. 12v mini split air conditioner fast Cooling in hot Summer, Say goodbye to sweating.
●Variable Frequency Inverter Cooling - 12v Mini Split Air Conditioner adjusts its operating frequency according to the surrounding temperature, hence reducing energy consumption. The inner unit is equipped with an ultra-quiet mini evaporator, it controls temperature intelligently and operations below 60dB to create a comfortable environment
●12V DC Power Supply & Low Voltage Protection - The air conditioner cuts off automatically to stop the battery from running out power, which ensures the car could start as usual. There are over-voltage and over-current protection as well, safe and worry-free!
●Durable Build & Long-Lasting Quality - Made from sturdy ABS, the shell enjoys excellent resistance to deformation and corrosion, our 12 volt air conditioner conditioner ensures long-lasting durability. The package includes internal and external units with both accessories and instructions, ensures a quick and easy installation.
●Truck Drivers Partner - Indoor Unit Size: 18*11*6inch; Outdoor Unit Size: 16*7*28 inch(?????? ???? ?????????????? ????????????????????????, ???? ?????? ???? ?????? ????????). Fits Trucks, Semi Trucks, Cabover Semi Truck, Container Semi-truck, Tractor-Trailer, Boats, RVs, Vans, Excavators, Passenger Cars, Agricultural Vehicles, Engineering vehicles etc.
●Mieligo Service - Any problem concerning installing, vehicle fitment, sizing, invoices, pieces missing or broken. Swift, prompt service and support, replies in 12 hours.


Description

12v air conditioner 12 volt dc air conditioner 12v dc air conditioner 12v dc mini split ac12v air conditioner 12 volt dc air conditioner 12v dc air conditioner 12v dc mini split ac
12v air conditioner 12 volt dc air conditioner 12v dc air conditioner 12v dc mini split ac12v air conditioner 12 volt dc air conditioner 12v dc air conditioner 12v dc mini split ac
12 volt dc air conditioner 12v dc air conditioner mini split ac truck air conditioner12 volt dc air conditioner 12v dc air conditioner mini split ac truck air conditioner
12 volt dc air conditioner 12v dc air conditioner mini split ac truck air conditioner12 volt dc air conditioner 12v dc air conditioner mini split ac truck air conditioner
12v air conditioner 12 volt air conditioner 12 volt dc air conditioner12v air conditioner 12 volt air conditioner 12 volt dc air conditioner
12v air conditioner 12 volt dc air conditioner 12 volt air conditioner 12v dc air conditioner12v air conditioner 12 volt dc air conditioner 12 volt air conditioner 12v dc air conditioner

  1. Install the External Machine: Remove the casing, mark the drilling position, use an 8mm drill to drill holes, use a riveting tool to fix the rivet nut at the drilling point, install shock pads and sleeves at the holes of the external machine, and fix the external machine to the car .
  2. Install the Expansion Valve: Remove the iron sheet at the position of the expansion valve of the evaporator, and fix the expansion valve to the evaporator. The two black screws correspond to the two holes, so there is no need to worry about wrong installation.Then wrap it in black cotton wrap.
  3. Install the Indoor Unit: First install the wooden board to the indoor wall, and then install the evaporator on the wooden board.
  4. Install High & Low Pressure Pipelines: First open a (50mm) hole in the car, and then install the rubber cover with three holes. The thick pipe is the low pressure pipe and is connected to the compressor. The thin tube is a high pressure tube and is connected to the condenser. Then connect the other end of the high and low pressure pipes to the holes corresponding to the expansion valve of the indoor unit, use long black screws and iron sheets to clamp the aluminum joints, and tighten the screws.
  5. Install the Connection Line: Connect the connection lines of the internal and external units, plug the power cord plugs into each other, and connect the drain pipe of the evaporator.
  6. Vacuuming/Adding Refrigerant: It needs to be vacuumed for 15-20 minutes, and then add refrigerant R134a/600g. The refrigerant can be added according to the pressure value. Generally, after the R134a refrigerant is injected into the air conditioning system, the pressure at the low pressure port is 35psi, and the pressure at the high pressure port is 140-180psi.
  7. Connect the Power Cord to the Battery: Connect the power cord to the battery, pay attention to the positive and negative poles of the battery, avoid connecting them conversely, + positive / - negative. It is forbidden to connect it to the power-off switch and the power switch.
  8. Test to see if it works: Start the Air Conditioner to see if it works. If the current is insufficient, the refrigerant is too much or not enough, the control panel will display a code, which can quickly troubleshoot.

12v air conditioner 12 volt air conditioner 12 volt dc air conditioner 12v air conditioner 12 volt air conditioner 12 volt dc air conditioner 12v air conditioner 12 volt air conditioner 12 volt dc air conditioner 12v air conditioner 12 volt air conditioner 12 volt dc air conditioner 12v air conditioner 12 volt air conditioner 12 volt dc air conditioner 12v air conditioner 12 volt air conditioner 12 volt dc air conditioner
EAC1009.12 EAC001.25 EAC001.28 EAC001.30 EAC001.33 EAC.001.12.24.R
Price $759.99 $759.99 $759.99 $649.99 $779.99 $639.99
Rated Input Power 960W 960W 800W 750W 960W 850W
Rated Current 40-60A 960W 40A 45-60A 80A 30-40A
Cooling Capacity 3000W 2400W 2600W 1800W 2100W 1800W
BTU 10000 8000 9000 6000 8000 6000