How to Use Magnetic Eyelashes with Eyeliner - Step-by-Step Guide:
Step 1: Prepare Your Eyelids
Begin with clean, dry eyelids. Ensure there is no makeup or oil on your eyelids for optimal adhesion. If you usually wear eye makeup, apply eyeshadow and eyeliner before starting with the magnetic eyeliner.
Step 2: Shake the Magnetic Eyeliner
Shake the magnetic eyeliner well before use. This helps to evenly distribute the magnetic particles, ensuring a strong bond between the liner and the magnetic eyelashes.
Step 3: Apply the Magnetic Eyeliner
Carefully apply a thin line of the magnetic eyeliner along your lash line. Ensure the line is close to the base of your natural lashes for a secure hold. Allow the eyeliner to dry for a few seconds.
Step 4: Attach the Magnetic Eyelashes
Take one magnetic eyelash and gently position it above your natural lash line, starting from the inner corner. The magnets on the lash band will naturally adhere to the magnetic eyeliner. Adjust the lash position until it aligns perfectly with your natural lashes.
Step 5: Secure the Outer Corners
Press down gently on the outer corners of the magnetic eyelashes to ensure a secure hold. The magnetic eyeliner should firmly connect with the magnets on the lash band. Repeat the process for the other eye.
Step 6: Customize the Length
If the magnetic eyelashes are longer than your desired length, you can trim them with small, sharp scissors. Trim from the outer edge to maintain the natural taper.
Step 7: Blend with Mascara (Optional)
For a seamless look, you can apply a coat of mascara to blend your natural lashes with the magnetic ones. This step is optional and depends on your preference.
Step 8: Removal
To remove the magnetic eyelashes, gently peel them off starting from the outer corner. Store them in their original case for reuse. To remove the magnetic eyeliner, use an oil-based makeup remover.