Product Specification:
Voltage: 12V
Color: RGB Multicolor
Control Mode: APP Control
Optical Fiber Length: 236 inch
Transparent Tube Length: 236 inch
Installation Location: Central control/door/Skylight/Armrest box/Roof/Seat/Car floor
Package includes:
Optical Fiber x 1
Transparent Tube x 1
LED car light source x 5
Floor Lights for Car x 4
Cigarette Lighter Plug x 1
Controller x 1
Power cable x 2
Prying Tool x 1
Cable Ties x 12
How to Install
1. Put the optical fiber into the transparent tube, and cut the transparent tube skirt by 10mm.
2. Insert the transparent tube with optical fiber into the gap (the yellow prying tool can be used as an auxiliary operation tool during operation). Or use the provided cable ties to fix the transparent tube with optical fiber to the designated location.
3. Cut off the excess transparent tube and optical fiber.
4. Connect the optical fiber with the transparent tube to the LED source and tighten the screws.
5. Organize and hide the wires.
6. Peel off the double-sided tape of the car floor lights and stick it on the designated position after ensuring the car surface dry and clean.
7. Connect the car power supply with a power core or a car cigarette lighter plug (with a fuse).
How to Use the App to Control the Car Led Lights
1. Scanning the QR code on the control box to download the APP "Lotus Lantern".
2. Turning on your phone Bluetooth.
3. Connecting Bluetooth in APP instead of mobile phone settings. (This App is fit for IOS and Android Systems)
Note
1. After receiving the led ambient lights, please power on them to test whether can be used normally. Please use in the specified 12V operating voltage to ensure that the light will not break down.
2. The optical fiber should not be folded or excessively bent, otherwise, the light cannot pass through.