![ambient 02](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Installation Steps
- Measure the length of the part to be installed, then cut the same length on the optic fiber and the transparent tube.
- Pass the cut optic fiber through the transparent tube from step 1.
Install the transparent tube with fiber optic in the location where it needs to be installed (use the included tool to pry open the slit in the location to be installed).
3. Link the light strips to the transparent tube installed in step 3.
Place the wires and LED lights in the appropriate location (can be hidden in the center console, under the footrest or other places).
4. There are 2 options for installation of USB wiring and cigarette lighter wiring.Connect the cig lighter OR usb to the controller, power up.
If the fiber optic and transparent tube are installed in acute corners, please minimize the wear of the fiber.
If the length of a section of fiber optic used in the installation process is long, it is recommended that a light strip (RGB LED light bead) be installed at each end of the fiber optic.