The Product: A new 1" offset bracket to mount Santee "Designer Series" Y-Pipes on 1984-2006 Harley Softails. You may be able to use this bracket on custom applications as well.
Research: We were unable to find this bracket in our dealer catalogs or online. We did find the exhaust this fits on the RetroCycles website which is where we acquired the applications listed above. Since we believe this can be used on custom applications as well we have measured this bracket. Using the second picture as a reference this bracket measured as follows:
The overall length, top to bottom, is about 5-13/16" long. Measuring across the bracket from the lower left to the edge of the "hooked" end measured about 4-1/4". The distance between the two oblong mounting holes, measuring center to center, is about 2". The distance between the center of the round mounting hole, towards the bottom of the bracket, to the middle of the "hook" measured about 2-1/4". Please keep in mind these measurements were taken with a tape measure and may be slightly inaccurate.
Layout of pictures: The first four pictures show the bracket from various angles. In the fifth picture you can see the label on the packaging which shows the Custom Chrome part #695037 and where it states this is for exhaust part #11447.
Condition: This bracket is new and in great shape aside from some light rub marks caused by the packaging rubbing against it.