Applications:
Use to make for DIY projects, Tron costumes, room decoration, Raves, Displays, Burning Man costumes etc
Use it on your car to accent your dashboard, floor panel, create your own Tron car or motorcycle
Use it in your room to light up doors, molding and headboards
Offer 360 degrees of illumination throughout its entire length. Product Instruction:
1 cold light must be connected with the drive to use, and can not be connected directly to the power supply.
2. Cold light can use double-sided tape or glue fixed and then the car.
3. Cold light can cut use, cut the part can be discarded, ownership length does not affect the use of the remaining part of the.
Product Specification:
Connector Type: EL 2 Pin Female
Voltage: 12V DC
Mode: Constant light/Off
Power supply: USB interface
LED Type: Cold LED Light Strip
Load: 1-10M EL wire/EL strip
EL Wire Length: 180mm/7.1inches
USB Wire Length: 740mm/29inches
Inverter Size: 40x32x39mm/1.57x1.27x1.16inch
Bottom Size: 54x32mm/2.1x1.27inch
Please Notice:
1. There will be a little noise when using the product due to their work principle.
2. Please do not pull this el wire with strong force.
3. Avoid excessive pulling or bending of the EL wire when it is installed.
4. Switch off electrical power quickly when the EL wire does not light to avoid damaging your EL inverter. There may be a short or open circuit in the EL wire.