Feature

●1x Air compressor with air tank, 1x hose, brass fittings, fuse, fuse holder and mounting hardware are included
●Max pressure : 150 PSI; Power input : DC 12V; Tank capacity : 6 Liters / 1.60 Gallons
●The steel tank and aluminum alloy compressor are durable and sturdy for your long-lasting use
●Portable Air Compressor Pump Tire Inflator For Train Horns mototphome Tires
●This onboard air compressor for jeep comes with an all-in-one design, and mounting bracket included for your quick and easy installation, designed for onboard solution for air horns, inflation of tires, air bed, etc.


Description

Air CompressorAir Compressor

150PSI DC 12V Air Compressor with 6 Liter Tank

  • Comes with built-in 0-140 PSI pressure gauge & 120/150 PSI pressure switch.
  • Designed for any high-pressure air horns that require on-board air system.
  • Equipped with built-in temperature switch.
  • Will automatically shut off when air compressor goes over 176 Degrees F and restart when it gets back down to 158 Degrees F.
  • 1x air compressor with air tank, 1x hose, brass fittings, fuse, fuse holder and mounting hardware are included.
  • Professional installation is highly recommended.

Specification

Max Pressure 150 PSI
Power Input DC 12V
Tank Capacity 6 Liters / 1.60 Gallons
Current 25 A
Power 180 W
Duty Cycle 25%
Flow Rate 35 L/M
Pressure Switch Settings 90 PSI on, 150 PSI off
Compressor Dimension 6" (length) * 16.5" (width) * 12" (height)

Works On-Board Air System For All 12V Vehicles

Air CompressorAir Compressor

Air CompressorAir Compressor

Air CompressorAir Compressor

Air CompressorAir Compressor

12 Volt Onboard Air Compressor System

  • Comes with 1 set of 150 PSI air compressor with 6 liters / 1.60 gallons air tank.
  • Portable Air Compressor Pump Tire Inflator For Train Horns mototphome Tires
  • This is a great & quiet compressor that can be mounted almost anywhere in a vehicle

  • This compressor comes with four vibration pads to install under each leg when mounted, a 30 amp fuse, a petcock style tank moisture drain, and a 3 Ft 3/8" air hose for hook-up to be used with the push lock fitting on the side of the tank. If you have a different hose for installation you can unscrew the 3/8" push lock fitting and use the 1/4" female npt port. Tank drain does not come installed, vibration pads must be used to provide clearance below the tank for drain to be installed.
  • This onboard air compressor system features the steel air tank and aluminum alloy compressor and can offer reliable performance, suitable for air horns on trucks, cars，and boats, inflation of tires, air beds, sports balls, etc.

Product information