Feature

●【 Material 】-The bus bar is composed of brass bottom plate and 304 stainless steel screw terminals. The 3mm copper bar is thicker than other 2.0mm brass bus bars, and can bear the actual current of 250A. The current is safe and stable, with low resistance and conductivity. Compared with other iron terminals of bus bars, it is not easy to rust. The protective sleeve and base are made of nylon, which is flame retardant to prevent accidental electrical short circuit and make the circuit safer.
●【 Product features 】-The bus bar is fashionable and can distribute power more effectively. Large-scale connection is used for battery-specific grounding, and small-scale connection is used for low voltage. The bus bar and the base are fixed by M10 column, which can bear large torque. The bus bar is very firm and will not fall off, and the bus bar will not shake when the nut is unscrewed. The exposed areas on both sides allow 180 installation.
●【 Parameter 】-Maximum voltage: 300V AC, 48V DC, and maximum current: 250A.
●【 Scope of application 】-Using battery bus bars for wire management and wiring can make circuit wiring neat and prevent electrical short circuit. Widely used in automobiles, automobiles, trucks, ships, boats, yachts, etc.
●【 Packaging 】-One red terminal: 4 x 3/8 inch (M10) with screws: 6x#8 battery bus bar, one black terminal: 4 x 3/8 inch (M10) with screws: 6x#8 battery bus bar, 4 battery connectors, 4 heat shrinkable tube bus bars and 12 terminals.


Description

250A 12V Bus Bar Marine,Power Distribution Block with Cover with 4 x 3/8”Post 6 x #8 Screws Terminals,Battery Bus Bar with 4PCS Lugs and 4PCS Heat Shrink Tubing for Car Boat Solar Wiring