Feature
●USED TO: The Water Flow Switch is used to measure the dynamic state of the liquid flowing through the pipeline, such as water, ethylene, glycol and other liquids that are not corrosive to copper.
●USAGE: When the flow rate of Electrical Valve fluid exceeds or falls below the set flow rate, the SPDT contact can open one circuit and simultaneously disconnect another circuit. Flow switches are usually used where interlock or cut-off protection is required.
●HIGH STABILITY: The repeatability error of the Electrical Water Valve is about 2.5%, which ensures the high stability of the product, and the corrosion-resistant built-in valve prevents air leakage when changing tools.
●SAFER TO USE: Electrical Flow Switch is IP54 protection grade, safer to use, very suitable for water treatment system, central air conditioning, water cooling unit, Rated voltage: 250V, Rated current: 15A.
●CUSTOM SERVICE: Your satisfaction is our utmost concern. If you have any questions about the product, please feel free to email us. Our customer service will try our best to give you a satisfactory answer within 24 hours.
Description
Installation method:
1. Open the flow switch
2. The switch has been set at minimum flow rate. Turn the adjusting screw counterclockwise to increase the flow setting value.
3. Press the target to check whether the micro switch can work normally. Excessive clockwise rotation of the adjusting screw may to the failure of the flow switch.
4. After the installation, please press the lever of the flow switch several times to check. If there is no click sound, turn the adjusting screw counterclockwise until there is click sound.
5. The adjustment screw of lacquer seal is only used for the first time