Feature(may vary by option.)
●【Set Specification】All Made in Japan (Niigata prefecture)【Ikenobo Scissors】Size: L 6.49 x W 1.77 x H 0.94 in (165mm x 45mm x 24mm) | Blades: 1.77in (45mm) | Weight:5.29oz (150g) | Material: S58C carbon steel |【Black Brass Kenzan】Size: 3.14x3.14x0.82inch(80x80x21mm) | Weight: 0.9lbs(409g) | 1/16"(1.4mm) in diameter, 1/2"(13mm) in height | Number of Needles: 331 | Material: Brass, paint【Needle Cleaner and Straightener】Size: Φ0.2"(5.5mm) L 2.6"(70mm) | Weight: 3oz(8g) | Material: Brass, Steel wire
●【Ikenobo Scissors】1)【Multipurpose】For general ikebana and flower arrangement, gardening and delicate work. No problem with thick branches because of sturdy edges. 2)【"Warabi" Fern Shaped Handle】Classic design with curved shaped handles resembling fern’s leaves. The handles are used for crushing the ends of hard stems and branches. 3)【Easy to Use】Hold the top handle between the index and thumb and allow the weight of the bottom handle to drop open the bottom blade, acting as a lever.
●【Black Brass Kenzan】1)【Black Coating】Matches with a darker colored vase and makes kenzan less noticeable; Easy to maintain; Stain-resistant. 2)【Removable Rubber Gasket】Rubber gasket prevents scratches/or damage to your vase. 3)【Hold Upright】Keeps/stabilizes your flowers upright and in position, while allowing water and nutrient absorption. 4)【Keep Water Clean】Helps water to remain clear for a longer time.
●【Needle Cleaner and Straightener】1) 【Clean Kenzan】Clean the debris of the flowers, dirt, and dust between kenzan needles. 2)【Straighten Needles】Straighten and correct the bend or inclination of kenzan needles. 3)【Easy to Use】Insert the straightener into the needle and raise it vertically. 4)【2-in-1 Feature】You can easily switch cleaner or straightener by removing the screw at the tip and replace it in the opposite direction.
●【Made in Japan】Real Japanese floral arrangement tools made by the artisans of Sanjo in Niigata Prefecture.
[Black Kenzan 3-1 & 4 (80mm) + Care Tool]
[Black Kenzan 2.4 (61mm) + Care Tool]
Description
【Kit Specification】
- Ikenobo Ikebana Scissors
Length of Blades: 1.77in (45mm)
Weight: Weight:5.29oz (150g)
Material: S58C black carbon steel
Origin: Made in Japan (Niigata prefecture)
- Black Brass Kenzan
0.9lbs(409g)
Pinfrog Size: 1/16"(1.4mm) in diameter, 1/2"(13mm) in height
Number of Needle: 331
Material: brass needle C2700W 18-8 stainless, paint, natural rubber base
Manufactured: In Niigata, Japan
- Needle Cleaner and Straightener
Weight: 3oz(8g)
Made in Japan (Niigata Prefecture)
Material: Brass, Steel wire
【Caution】
- Blades are very sharp, so please handle with care. Children must be supervised and instructed in proper utilization when using the scissors.
- Carbon steel is susceptible to rust, so occasional sharpening and proper maintenance is advised for prolonged use.
- The kenzan needle tips are very sharp.
- Do not leave kenzan behind unattended or in a risky position. It may cause injury by accident.
- Dry with a clean cloth after use.
- Store/Keep out of reach of children.
- Leaving it wet may corrode the rubber base.
- Bending needles may cause loosening and provoke accidents.
【About Wazakura Japan】
Wazakura Japan began their journey collaborating with Japanese craftsmen as to spread the authentic bonsai tools, ikebana flower scissors and accessories to the world.
All items are 100% made in Japan.