Feature(may vary by option.)
●【Set Specification】All Made in Japan (Niigata prefecture)【Koryu Scissors】Size: L 6.69 x W 3.93 x H 0.78 in (170mm x 100mm x 20mm) | Blades: 1.77in (45mm) | Weight: 6.52oz (185g) | Material: S58C carbon steel |【Brass Kenzan】Size: 2.4x2.4x0.82inch(61x61x21mm) | Weight: 0.5lbs(247g) | Pin frog Size: 1/16"(1.4mm) in diameter, 1/2"(13mm) in height | Number of Needles: 168 【Needle Cleaner and Straightener】Size: Φ0.2"(5.5mm) L 2.6"(70mm) | Weight: 3oz(8g) | Material: Brass, Steel wire
●【Koryu Scissors】1)【Multipurpose】For Ikebana flower arrangement, the long shank and short blades makes it versatile and beginner friendly. Good also for gardening & bonsai work. 2)【"Tsuru" Looped Handle】Classic traditional Japanese design with looped shaped grip for less tiring user experience. For a more ergonomic control, use with gloves. 3)【Clean Cut, Sharp Edge】With a short rounded but pointed edge, it severs flower fibers cleanly resulting in better water absorption.
●【Brass Kenzan】1)【Removable Rubber Gasket】Rubber gasket prevents scratches or damage to your vase. 2)【Keeps Upright】Keeps/stabilizes your flowers upright and in position while allowing water and nutrient absorption. 3) 【Helps Water Clean】Helps water to remain clear for a longer time.
●【Needle Cleaner and Straightener】1) 【Clean Kenzan】Clean the debris of the flowers, dirt, and dust between kenzan needles. 2)【Straighten Needles】Straighten and correct the bend or inclination of kenzan needles. 3)【Easy to Use】Insert the straightener into the needle and raise it vertically. 4)【2-in-1 Feature】You can easily switch cleaner or straightener by removing the screw at the tip and replace it in the opposite direction.
●【100% MADE IN JAPAN TOOL SET】Real Japanese ikebana tool kit made by local artisans from the cities of Sanjo, Niigata Prefecture. The scissors are made by a third generation artisanal blacksmith worjshop from Sanjo, a city known since 17th century for their metalworking skills. The kenzan is made following traditional design from ikebana Sogetsu School.
[Brass Kenzan 2.4 (61mm) + Care Tool]
[Brass Kenzan Φ3-1 & 4 (80mm) + Care Tool]
Description
【Kit Specification】
- Koryu Ikebana Scissors
Length of Blades: 1.77in (45mm)
Weight: Weight:6.52oz (185g)
Material: S58C black carbon steel
Origin: Made in Niigata prefecture (Japan)
- Brass Kenzan
Weight: 0.5lbs(247g)
Pinfrog Size: 1/16"(1.4mm) in diameter, 1/2"(13mm) in height
Number of Needle: 168
Material: brass needle C2700W 18-8 stainless, lead, natural rubber base
Origin: Made in Japan (Niigata)
- Needle Cleaner and Straightener
Weight: 3oz(8g)
Made in Japan (Niigata Prefecture)
Material: Brass, Steel wire
【Caution】
- Blades are very sharp, so please handle with care. Children must be supervised and instructed in proper utilization when using the scissors.
- Carbon steel is susceptible to rust, so occasional sharpening and proper maintenance is advised for prolonged use.
- The kenzan needle tips are very sharp.
- Do not leave kenzan behind unattended or in a risky position. It may cause injury by accident.
- Dry with a clean cloth after use.
- Store/Keep out of reach of children.
- Leaving it wet may corrode the rubber base.
- Bending needles may cause loosening and provoke accidents.
【About Wazakura Japan】
Wazakura Japan began their journey collaborating with Japanese craftsmen as to spread the authentic bonsai tools, ikebana flower scissors and accessories to the world.
All items are 100% made in Japan.
Japanese Blacksmith
Small blacksmith shops are still existing around Japan. Their traditional skills are preserved and passing down to their descendants. Wazakura collaborates with the craftsmen from Sanjo (Niigata) where is well-known for over hundreds of years of blacksmith history.