Avoid dropping stitches
Please Note!!!
Dropping stitches
- Please check whether the wire rack is installed correctly.
- Different sizes of wool need different degrees of tightness control. It is recommended that thick threads only pass through the outermost large thread hole.
- The thread ball should be loosened, loosen the thread ball before starting the needle.
- Starting the needle:
- First turn the handle clockwise to the starting needle, and then start to hang the thread onto the needle
- After hanging the thread from the right side of the starting needle, the first stitch should be inside the crochet hook. The second stitch is on the back of the crochet hook. Rotate the handle in this order to hang the thread. The first loop needs to be operated slowly.
- After the first loop of threading, the thread must pass through the thread opening and be placed in the groove, and cannot float on the surface.
- The needle does not come off automatically:
- The edge of plain knitting is easy to get stuck or drop the needle at the beginning of knitting, because there is no automatic pull off, at this time it should be manually pulled off
- Some knitted fabrics will have two thread is sheathed on the same needle, and it is not easy to automatically take off. At this time, we need to turn slowly and take off manually.
- If the yarn floats on the line card, if it is only one or two, press it manually. If there are too many, it proves that the yarn is too loose. At this time, you need to adjust the yarn on the spool and observe whether there is any yarn floating at the thread inlet.
This knitting machine is not suitable for Electric Knitting Machines Adapter, please dont install it without permission to avoid may causing damage to the machine.