How to Use:
1. Put two temperature measuring rods into the T1 and T2 temperature measuring sockets according to the positive and negative poles
2. Press the POWER switch to turn on the thermometer, and then press the POWER switch to turn off the thermometer
3. Select the input terminal, T1, T2 or T1?T2
4. Use the temperature probe to start the test
Specification:
Item Type: Digital Thermometer
Model: DT-1320
Material: ABS
Battery: 1 x 9V 6F22 Battery (Battery Not Included)
Purpose: Industrial temperature measurement, electronic temperature measurement
Basic Parameters:
1. General Specifications:
Display Method: 3x1/2 digit 0.5 inch, large liquid crystal display (LCD) display
Polarity Indication: Automatic Polarity Indication "-"
Low Voltage Indication: Automatic low voltage detection, when the battery working voltage is lower than the working voltage, it will display: "battery low".
Sampling Rate: 2.5 Seconds/Time
Input Terminal: T1, T2 Selection
2. Electrical Specifications: (Temperature: 23℃±5℃, Humidity: Below 90% Relative Humidity)
(1) Storage Temperature: -10℃~60℃, 10℉~140℉
(2) The Maximum Input Voltage of Thermocouple: DC 60V, AC 24V
(3) Relative Humidity: 0%~90% (0℃~35℃)
(4) Operating Temperature: 0℃~50℃, 32℉~122℉
(5) Accuracy: (Temperature: 23℃±5℃, Relative Humidity Below 80%RH)
Function Measuring Range Accuracy ℃ -200℃~1000℃ ±(0.3 reading +1℃) ℉ -328℉~2498℉ ±(0.3 reading +2℉) ℃ 1000℃~1370℃ ±(0.5 reading +1℃)
Package List:
1 x Thermometer (Battery Not Included)
2 x Temperature Probe
1 x Manual