Wear Gloves Note: The metal edge is sharp, please wear gloves when installing. Clean the surface and make sure the surface is FLAT, CLEAN and DRY.
|
Measure and Cut Measure and draw an area with a pencil, then cut the desired length you need.
|
Peel Peel off the adhesive backing and stick it onto the smooth surface. (When the temperature is below 20 degrees, you can use a hair dryer to preheat the back glue to get better adhesion effect.)
|
Press Press the molding trim while sticking to ensure that the strip is compeletely attached to the wall, then you can peel off the PROTECTIVE FILM. ( Wait 24 hours to completion)
|