Diameter 0.8~10mm
Shank diameter: 2.35mm/3mm
Diameter of grinding head: 0.8-10mm
Diamond electroplating grinding head is suitable for polishing jade carving, stone carving, ivory carving, etc., and also used in dental plastic surgery, metal surface polishing and other fields.
Answer how long the whole grinding head is:
The length of the grinding head including the rod will vary due to the size of the grinding head, so as to coordinate.
Generally, the length of the grinding head below 3MM is about 3.5CM-4.0CM,
If the grinding head is 10 mm or larger, the length is about 5.0 cm.
Tip:
1. Be sure to drain the water to cool;
2. The faster the better. Generally, the linear velocity is not less than 10-20 meters per second;
3. Lightly press into the knife, the diamond tool is processed by grinding, it is not easy to remove the powder with too much force, and the tool (especially the small tool) is also easy to be damaged.