Feature(may vary by option.)
●Self Adhesive baseboard molding: it has toe design, which can perfectly cover the gaps between floors and walls. And it is very flexible and can effectively deal with curved walls or uneven ground
●Premium material: made of high quality vinyl material, the self adhesive vinyl wall base is flexible and durable. Length：5meters, width：1.1cm, proper size is perfect for most interiors
●Peel and Stick Backing: Comes with adhesive backing, this peel and stick vinyl wall base provides a firm fix to the wall and can be easily applied without drilling. Adhesive floor wall base can stick to almost any smooth surface (tiles, plastic, marble, metal, glass, wood, smooth wall, ext)
●Wide range of applications: The adhesive wall base is ideal for finishing decoration project of floors and walls. Can adds a perfect and durable finished edge to your home, office, garage, school or anywhere you need. The adhesive back vinyl wall base has a decorative feature while helping to protect the base of wall and floor
●Easy to install: Clean and dry the installed surface, measure the right length and cut with a scissor, tear off the backing and press firmly on the wall for a strong and secure hold
[5m & 16.4ft Black]
[5m & 16.4ft Gray]
[5m & 16.4ft White]
[5m & 16.4ft Brown]
[5m & 16.4ft Dark Brown]
Description
Material: PVC
Length: 5m/16.4ft
Width: 10cm/4in
Toe Width: 1.1cm/0.45 in
Color: Black , Brown , Gray , White , Dark Brown
Thickness：2mm/0.08 in
Features:
Flexible: very friendly to uneven ground. Make the connection between the wall and the ground smoother.
This wall base has a toe design, which can effectively cover various defects and uneven ground, and can also prevent dust from entering the gap.
Easy to cut: This wall base molding trim can be cut to any length and shape you need.
Easy to Clean: When something dirty, just wipe it with a clean damp towel.
Easy to install:
1. Clean up the walls.
2. Cut to desired length.
3. Peel off the red film.
4. Stick it on the wall, and press repeatedly to make it fully contact the wall.
NOTES:
1. When the temperature is below 18 degrees, please use a hair dryer to preheat the backing glue for a better using effect.
2. Stick the wall base fully on the wall. Press back and forth to make it firmly fixed on the wall. It’s recommended to keep 24 hours for more stability, don’t try to pull it up until it gets completed the installation.
3. Powdered wall、Rough cement wall、Uneven wall、Damp wall、Wall covering、Wall Sticker.In the above situation, the viscosity of the glue will decrease slightly. It is recommended to add some glue during the installation process and complete the installation with the help of a hot air blower to achieve the best performance.