Feature

●Model: TC613 + 2TRA (inner diameter (d) = 3/8 ", outer diameter (d) = 13/16", total thickness = 3.584mm)
●The needle roller thrust bearing can only bear axial load in one direction
●Used in combination with two thrust washers for applications where adjacent machine components cannot be used as raceways
●Steel cage guide rail and evenly distributed rollers to reduce friction, vibration and noise
●The hardened chromium steel roller has heat resistance and durability under heavy load


Description

Specification:
Type: Thrust Needle Roller Bearing
Bearing No.: NTA613+2TRA
Needle roller material: chromium steel (GCr15)
Cage material: ST14 steel
Bore Diameter (d): 3/8" / 9.525mm
Outside Diameter (D): 13/16" / 20.64mm
Bearing Thickness (T1): 5/64" / 1.984mm
Washer Thickness (T2): 0.8mm
Total Thickness: 3.584mm
Dynamic Load Capacity (Cr): 4848N
Static Load Capacity (Cor): 12188N
Maximum Rotational Speed (Oil): 23000rpm
Package includes: 6 x Thrust Needle Roller Bearings NTA613+2TRA + 12 x Washers

This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.
These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.
Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.
Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.