Feature

●★ The glue handle is made of new international environmentally friendly materials, which has a longer service life, rapid heating and automatic constant temperature.
●★ No pouring and no leaking; Heat insulation is installed at the end of the barrel to extend the life of the silicone sleeve, thus extending the life of the glue gun.
●★ The handle designs conform to the designs of the dynamics of the human hand. The nozzle of the gun is made of brass, which is more resistant to high temperatures than ordinary aluminum nozzles. It feels good and does not get fatigued after long-term use.
●★ The product can be used normally with AC voltage from 100 V to 240 V. The electrical insulation resistance is not broken when energized at 3750 V/min. You are not limited by voltage fluctuations. Built-in safety which makes it safer to use.
●★ Using high-tech ceramic PTC thermistor heating component, the heating speed is fast, the PTC thermistor will automatically maintain a constant temperature when the temperature reaches the set temperature, saving energy consumption and extending the service life.


Description

Specification:
Item Type: Hot Glue Gun
Material: ABS+Brass
Model: HL-F
Color: White
Wide Voltage: AC 100- 240V (supports use normal with AC voltage 100-240V)
Power: 150W
Frequency: 50/60Hz
Power cord length: Approximately 140cm/55.1in
Usage: Used on plastic, metal, wood, paper, toys, electronics, furniture, leather, etc. You can experiment and develop. The use is very wide.
Instructions:
1. This series of products can be applied to glue strips with a diameter of 10.8~11.5mm/0.4~0.5in.
2. Insert the glue strip from the end of the glue gun and send it to the barrel. After plugging in the power supply and preheating for 5-8 minutes, pull the trigger to extrude the melted glue and control the amount of glue.
3. During use, if the inserted adhesive strip does not run out at once, there is no need to remove the adhesive strip and it can be used after the next preheating.
Length: approx. 20cm/7.9in, 10cm/3.9in
Power Cord Length: Approx. 1.4 meters/4.6 feet

Packing List:
1 hot glue gun