Feature(may vary by option.)
●Designed to be used as an upgrade for previously painted rubber-base finishes
●Self Priming two coats suggested for initial application
●Yielding a 3 year average life
●Applied with a paint roller
●Coverage : 250 square feet per gallon on average
[Dark Blue]
Description
In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint
In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint is a self-priming paint designed as a re-coat for existing rubber-base finishes. If re-coating an existing interior, one coat is suggested. A second coat may be required on unpainted or porous surfaces. Chlorinated Rubber-Base Pool Paint has excellent chemical resistance and color retention, allowing the paint to last 3 years on average. Coverage: 250 square feet per gallon on average. This product should be applied with a 9" roller equipped with a 3/8" nap. Pot Life: Indefinite as long as it is properly sealed. Allow to cure 4 - 6 hours in between coats. Cure 10 days minimum before filling.
Made for Re-Coating
- Designed to be used as an upgrade for previously painted rubber-base finishes
- Self Priming two coats suggested for initial application
- Yielding a 3 year average life
- Applied with a paint roller
- Coverage : 250 square feet per gallon on average
Steps to Paint Your Pool
|
|
|
|
|---|---|---|
Determine Area SizeDetermining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer. |
Drain WaterNow that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint. |
Prepare for PaintNow that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime. |
|
|
|
|
|---|---|---|
Primer CoatNow that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint. |
Painting InteriorThe pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant. |
Fill and BalanceNow that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health. |
