Specification
Model: 186FA
Color: Black
Material: Iron, Die-casting Aluminum, Aluminum
Process: Spray Molding
Machine Type: Single-cylinder, Vertical, 4-stroke, Forced Air-cooled
Shaft Type: Recoil Manual Start
Crankshaft: Horizontal
Fuel Type: Diesel
Bolt Pattern: 4 Bolt
Combustion System: Direct Injection
Lubrication Mode: Pressure and Splash Compound Method
Power: 6.3kw, 10hp
Rotation Speed: 3600rpm
Displacement: 418cc
Fuel Tank Capacity: 5.5L/1.45Gal
Lubricating Oil Volume: 1.65L/0.44Gal
Fuel Consumption Rate: ≤280g/Kw. h
Compression Ratio: 19:1
Bore Stroke: 86x72mm/3.39*2.83inch
Shaft Diameter: 25mm/0.98inch
Shaft Length: 72.2mm/2.84inch
Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm Depth
Gross Weight: 49.85kg/109.9lbs
Net Weight: 41.85kg/92.26lbs
Package Size: 53*48*57.5cm/20.87*18.9*22.64inch
Product Size: 43*41*49cm/ 16.93*16.14*19.29inch
Package Included
1*Diesel Engine
1*English Manual
All Accessories for Assembly
Notes
1. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2. Please use the specified diesel and guarantee the diesel is clean. Please use different lubricating oils for different seasons and keep the oil quantity within the specified range.
3. Please don’t run the engine when it exhausts black smoke.
When using the air filter, remove the air filter element every 50 hours (if there is much dust, remove it every 10 hours, clean it with clean detergent, blow it dry, and then put it into use).