Package Included:
2x 40A Relay with Wiring Harness
1x 3/8" Thermostat Switch 185F On - 175F Off
1x 3/8" to 1/2" Adapter
2x Inline Fuse Holder
2x 20 Amp Fuse
1x Spade Connector for The Temp Sensor
8x Ring Terminals
4x Wire Connectors
If you want to turn on the fans when A/C activates, you would need an additional relay kit and follow the steps below:
Connect the RED wire from the A/C relay to the grey wire (sending unit) of the original fan relay harness
Connect the GREY and COFFEE wires from the A/C relay to the ground
Connect the BLACK wire from the A/C relay to the +12 volt of the A/C compressor clutch wire
Specifications:
Voltage: 12VDC
Temperature: Approximately 185F On - 175F Off
Thread Size: the temperature sensor has a 3/8 pipe thread, and a 1/2 adapter included