Feature

●??★Handmade item Materials: Brass Necklace Jewellery
●??★Special cleaning is not required, however if it has been in contact with water or high humidity some rusting may occur. Please use a rough cloth or fine sanding paper to remove the rust and then use a wax or oil or some water resistant solution to coat it again to protect from rusting.
●??★Handmade & Scroll Design/ Scroll Design Torc is coated by a water resistant finish to protect it from rusting.
●??★This torc style neck snake is made from Brass It is cut, braided, twisted, and styled using only hand tools. It is rigid like other torcs, but thin enough to be plyable by hand.
●??★Pliers may be used to shape and adjust it, but make sure to cover the Brass with to prevent excess scuffs and scrapes. Because the copper is not coated, it may develop a tarnish over time which can discolor the skin. Please see that the order you placed is from ARTIZANSTORE.


Description

This torc style neck Snake is made from uncoated 18 gauge Brass wire. It is cut, braided, twisted, and styled using only hand tools. It is rigid like other torcs, but thin enough to be plyable by hand. Most torc neck Snake are very thick and heavy, so this one is for those who prefer a lighter one. Pliers may be used to shape and adjust it, but make sure to cover the Brass with to prevent excess scuffs and scrapes. Because the Brass is not coated, it may develop a tarnish over time which can discolor the skin. If this happens, a rough kitchen scrubber or fine wet sand rubbed into the wire will clean and polish it.