Working method:
1.Turn Signal Light ,plug to CH1 channel,linkage CH1 servo direction channel,the rc car turn right/left,they will light on.
2.Backward-Light, plug to CH2 channel,the throttle rocker is in the middle position, the rocker is pushed back,they will light on
3.Brake signal light, plug to CH2 channel,the rc car is forward running, the rocker is pushed back,they will light on
4.Driving lights,light stays on if plug it to the receiver.
5.CH3 Control Simulation:
If toggle the CH3 button 1 times ,headlight & taillight set light on;
If toggle the CH3 button 2 times ,headlight & taillight set & fog-lights light on;
If toggle the CH3 button 3 times,headlight & taillight set & fog-lights light off;
cycle in turn.....
Universal RC light system fit for 1/10 RC car truck crawler,for example,compatible with Traxxas TRX4 HPI HSP Redcat Gen7 Arrma RC4WD Axial SCX10 Tamiya CC01 1/10 RC car truck crawler drift car
You can run it at night or dark area,highly simulation for rc lighting system,great scale looking.
The turn signal light,rc headlight rc taillight set compatible with Radiolink Flysky Futaba Dumbo transmitter remote controller.
If the rc car turn right/left,the turn signal light on,if the rc car forward,the headlight light on,and if backwards,the taillight set light on.
Use the receiver as the power supply,you need the Y cable .
The CH1 channel for the turn signal light,the CH2 channel for the headlight & taillight set.
Led Size:3mm(turn signal light,fog-lights )/ 5mm(headlight & taillight set, brake signal light , backward-light, driving lights );
Plug and play,easy to upgrade,the RC LED light system make your RC car more cool and attractive.
Material: Silicone & PVC
Working Voltage: 5V- 8.5V
The Receiver Channel: CH1 CH2 CH3
Required: JR Y Harness Cable
Type of Light:Turn signal light / headlight / taillight /brake signal light/ backward-light/driving lights