Feature

●Return to neutral?The ESC can return to the neutral position remotely, automatically brake and find the center position.
●REMOTELY RETURNING: With function of remotely returning to the neutral position, automatically braking and searching for the center position.
●Use enlarged heat sink and powerful cooling fan for heat dissipation, use a high frequency drive system.
●Aluminum Alloy Material]The 360A ESC is made of Exquisite workmanship aluminum alloy material, which is heat dissipation, and , and can be used for a long time.
●Suitable for 1/10 touring car/offroad vehicles/short course trucks/monster trucks/trucks/crawler etc.


Description

1. Applicable Models: Great accessories to upgrade your remote control car, the 35KG coreless motor digital servo is suitable for 1/8 1/10 1/12 RC Car.
2. High Performance: High accuracy potentiometer and high resolution digital chip with stable performance, strong i interference ability, quick response speed, more delicate and control.
3. Full Metal Gear Servo: The hard anodized high accuracy stainless steel metal gear can withstand higher loads and ensure the normal operation of the servo.
4. High Efficiency: The coreless motor provides quick response and super high efficiency, low power consumption and good working performance.
5. Fully : The fully servo system can maintain a good density even under humid conditions with superior performance.

Spec:
Item Type: 35KG Digital Servo
Shell Material: Aluminum Alloy
Product Color: Blue
Product Size: 40x20x41mm / 1.6x0.8x1.6in
Product Weight: Approx. 168g / 5.9oz
Working Voltage: DC 5V-7.4V
Dead Zone: 2?s
Working Frequency: 50-333Hz
Speed (6V): 0.13 Seconds/60°
Speed (7.4V): 0.12 Seconds/60°
Speed (8.4V): 0.11 Seconds/60°
Locked Rotor Torque (6V): 29kg/cm
Locked Rotor Torque (7.4V): 22kg/cm
Locked Rotor Torque (8.4V): 35kg/cm
Plug: JR Plug
Applicable Models: Suitable for 1/8 1/10 1/12 RC Car

How to Use:
Installation Instructions:1. Install the servo to the servo base first, without installing the servo arm or servo . Only fix the servo to the frame. Then connect the servo to the receiver, usually the CH1 or ST jack.2. After the servo is fixed, turn on the remote control, turn on the ESC after setting, and then the servo will stop at a fixed position.3. Without turning off the remote control and the servo, install the servo or servo arm to the servo output gear.

packing list:
2 x Servo
8 x Plastic Servo Arm
8 x Screw Barrel
8 x